AGP SCS8 200mm Stone Circular Saw | Wet Dry Cutting
AGP SCS8 200mm bevel-capable stone saw with 2200W constant speed motor. Precision wet/dry cutting for masonry, tile, and stone with 70mm depth. Taiwan-engineered.
Stone Circular Saw
SCS8
200 mm Wet and Dry, Bevel Stone Saw
A 200 ㎜ (8") wet and dry, bevel-capable stone saw with 70 ㎜ (2-3/4") depth of cut and 2200 W constant speed motor. Use the optional guide rail for precise control.
100% Taiwan Engineering Excellence, Proven Worldwide
With more than 30 years of R&D and manufacturing experience since 1989, AGP operates a fully integrated development and production center in Taiwan, supported by AGP Europe in Belgium for regional service and distribution. We provide comprehensive ODM support, including application testing, technical training, product certification (CE, CB, CSA, and more), and marketing assistance. Our competitive strengths include 100% Taiwan-based design, engineering, and manufacturing—ensuring consistent quality and rapid development cycles.
With deep expertise in customized motor design and application-specific engineering, AGP supports various industries by delivering tailored solutions and technical consulting. Our DEKRA-certified laboratory and rigorous internal and external testing processes ensure compliance with international safety and performance standards.
Every AGP tool is built for high power, precision, durability, user safety, and ease of operation—engineered to perform reliably in the most demanding jobsite environments.
Technical Specification
| Model | SCS8 |
|---|---|
| Power Input | 2200 W (220V) 1700 W (110V) |
| Voltage, Frequency | 230-240 V~ 50-60 Hz 110-120 V~ 50-60 Hz |
| No Load Speeds | 7200 min-1 |
| Arbor | 22.23 mm (7/8") |
| Blade Diameter | 200 mm (8") or 180 mm (7") |
| Cutting Depth (0°) | 70 mm (65 mm on rail) 200 mm blade |
| 60 mm (55 mm on rail) 180 mm blade | |
| Cutting Depth (45°) | 52 mm (47 mm on rail) 200 mm blade |
| 45 mm (40 mm on rail) 180 mm blade | |
| Cutting Width Range W / Parallel Guide | 10 - 130 mm |
| Overload Protection | With |
| Insulation Class | Class I with PRCD / GFCI |
| Dimensions (L x W x H) | 484 x 313 x 198 mm |
| Weight | 5.7 kg (12.5 lb) |
Standard Accessories
- Plastic Carry Case
- Quick-release Water Hose Coupling
- M6 L-Hex Wrench
- PRCD / GFCI Interrupter
- Parallel Guide
Optional Accessories
- 200 mm (8") Diamond Blade
- 180 mm (7") Diamond Blade
- Aluminum Guide Rails (1400 mm & 800 mm Available)
- Guide Rail Connector
Key Features
Constant Speed Motor
The constant speed electronics maintain an even speed for superior cutting results.
LED Load Indicator
The LED load indicator allows the operator to work at peak efficiency.
Bevel Cutting Capability
The bevel control allows clean, precise bevel cuts at any desired angle up to 45°.
Dust and water-resistant switch
The Dust and water-resistant switch is completely impervious to dust and slurry.
Main Handle Inline with Blade
The handle design allows the operator to push in the same plane as the blade for less effort and better control.
Parallel Guide
The parallel guide comes standard and allows precise straight cuts. Scale provided for convenient setup.
Depth Control
Precise, stepless depth control for situations which require limited cutting depth, such as renewing seams. Scales are provided for both 200 mm and 180 mm blades.
Dry Cutting with Dust Control
The vacuum port and dust control design helps minimize dust when dry cutting. We recommend using 200 mm blades for dry cutting due to the higher rotational speed required.
On-Board Wrench Storage
The L-hex wrench is always there when you need it to change the blade. All other adjustments are tool free.
Sighting Notches
The sighting notches allow the operator to confidently follow the cutting line. Marks are provided for 0°, 30° and 45° bevels.
Wet Cutting with Water Feed
The built-in water feed suppresses harmful dust and allows longer blade life. We recommend using 180 mm blades for wet cutting due to the lower rotational speed required.
Anti-Friction Strips on Base
The strips allow smooth movement over the workpiece.
- Youtube
- Download
How can you achieve precise bevel cuts and consistent performance across both wet and dry stone cutting applications on demanding jobsites?
The AGP SCS8 stone circular saw solves this challenge with a constant speed motor that maintains even cutting performance, bevel control up to 45° for clean precision cuts, and switchable wet/dry capabilities. The stepless depth control with marked scales for both 200mm and 180mm blades ensures you can handle specialized applications like seam renewal with confidence. Whether you're cutting tile, masonry, or stone, the SCS8's integrated water feed suppresses dust while extending blade life, or use dry cutting mode with dust control for maximum versatility. Request a technical consultation with AGP to see how the SCS8 can optimize your stone cutting operations.
Built entirely in Taiwan with AGP's integrated R&D and manufacturing expertise, the SCS8 exemplifies over 30 years of power tool innovation and quality assurance. The saw accommodates both 200mm and 180mm diamond blades, offers optional aluminum guide rails for enhanced precision control, and includes comprehensive safety features including PRCD/GFCI protection and Class I insulation. Whether performing wet cutting with water feed for extended blade life or dry cutting with dust control capability, the SCS8's parallel guide (included standard) and tool-free adjustments make it the ideal choice for stone cutting contractors and construction companies seeking certified, high-performance equipment. Contact AGP's international sales team to explore customization options and technical support for your specific masonry and stone cutting requirements.
OUR STRENGTHS
0%
Engineered & Made in Taiwan
0
Engineering & Manufacturing Professionals
0
Years of Engineering Expertise
