Electric Bevelers

Electric Bevelers

HP1400 + P3K High Frequency Converter
Power:
1400 W
Capacity:
6 mm Chamfer Height
Max. Capacity:
6 mm Chamfer Height
Type:
Shape Beveler
Type:
Shape Beveler
View Product

High Frequency Beveling System.

  • High frequency technology for high power-to-weight ratio and long duty cycles. Extremely stable rpm extends the life of consumables.
  • Vertical, direct drive brushless motor for zero maintenance and long life.
  • Anti-Vibration Side Handle.
  • Three indexable square carbide inserts ISO SEMT13T3. Optional radius inserts and 30° tool holder available.
COMPARE
EB24R
Power:
1100 W
Capacity:
60 Deg. 18 mm ; 45 Deg. 20 mm ; 37.5 Deg. 17.8 mm ; 30 Deg. 16.7 mm ; 15 Deg. 15.7 mm ; 0 Deg. 21 mm
Max. Capacity:
60 Deg. 18 mm ; 45 Deg. 20 mm ; 37.5 Deg. 17.8 mm ; 30 Deg. 16.7 mm ; 15 Deg. 15.7 mm ; 0 Deg. 21 mm
Type:
Plate Beveler
Type:
Plate Beveler
View Product

A plate beveler for angles from 0° to 60° with a maximum land width of 21mm with facing off and pipe beveling capability from 150 to 350mm.

  • AC Induction Motor for steady speed, low noise, and long life.
  • 12 Carbide inserts. Tool Holder ISO SPKN 120308. Bevel widths on straight and round materials.
  • Angular Adjustment Screw with angular adjustment from 0-60 Deg.
  • Depth-adjuster knob.
  • Depth Lock Screw.
  • Chamfer Height Scale.
  • Rollers for smooth operation.
COMPARE
EB12
Power:
1800 W
Capacity:
10.6 mm Chamfer Height
Max. Capacity:
10.6 mm Chamfer Height
Type:
Shape Beveler
Type:
Shape Beveler
View Product

Heavy duty shape beveler for 45 degree bevels with up to 10.6mm chamfer height. Excellent for beveling straight lines, curved shapes, cut-outs and countersinking holes over 30mm. Uses 6 square carbide inserts. Can also perform 30 and 37.5 degree bevels with optional tool holders.

  • Speed Control Thumb Wheel. Variable Electronic Constant Speed Circuitry maintains speed under load.
  • Precision Chamfer Height Adjustment with Dial Scale.
  • 6 Carbide Insert Tool Holder Set.
COMPARE
EB6T
Power:
1100 W
Capacity:
6 mm Chamfer Height
Max. Capacity:
6 mm Chamfer Height
Type:
Shape Beveler
Type:
Shape Beveler
View Product

Shape beveler for 45 degree bevels with up to 6mm chamfer height. Excellent for following curved shapes, beveling cut-outs and countersinking holes over 30mm.
Uses 3 standard square carbide inserts. Can also perform radiused edges with optional inserts and 30 degree bevels with optional tool holder.

  • Motor with variable constant speed electronics for consistent surface results.
  • Variable Speed Wheel for setting the best speed with different materials.
  • Square Carbide Inserts. 3 Indexable square carbide inserts: ISO SEMT13T3.
  • Tool-Free Bevel Height Setting with Micrometer Scale.
  • Bevel Height Scale.
  • Adjustable Dial Ring Support Deck.
COMPARE
Compare