BACK

High Frequency Concrete Chainsaw

CS18 + P8K Power Converter

Concrete chainsaw with 6500 W high frequency permanent magnet synchronous motor. Excellent for deep plunge cuts and precise corner cut outs with no overcuts.

  • Constant speed is maintained regardless of load.
  • LED Indicator Indicates load conditions
    (electronic & thermal protection).
  • Bumper Spike for increased leverage.
  • Flexible Splash Flap helps contain slurry.
  • Dual plane horizontal and vertical spirit levels for precise alignment.
  • Wide base for setting tool down and adjusting.
  • Special design allows very close to flush cutting.
  • Tool-free bar clamp lever for faster chain tension adjustment.
  • Special Motor Coupling Cable.
  • Hall Effect Switch is completely waterproof and dustproof.
Power:
6500 W (3~ 380-480 V) | 5500 W (1~ 230 V @ 32A) | 3600 W (1~ 230 V @ 16A)
Max. Capacity:
470 mm Depth of Cut
Gear:
This is some text inside of a div block.
Type:
Wet only
Dry Capacity:
Weight:

LED Indicator Indicates load conditions (electronic & thermal protection).

Flexible Splash Flap helps contain slurry.

Bumper Spike for increased leverage.

Dual plane horizontal and vertical spirit levels for precise alignment.

Spec
  • Model
  • CS18
  • Power Input
  • 3Φ~380-480 V: 6500 W
    3Φ~220-240 V: 5500 W
    1Φ~200-240 V: 5500 W (32 A), 3600 W (16 A)
  • No Load RPM*
  • 8500/min
  • Linear Speed
  • 20.7  m/s (3/8"), 25.7 m/s (0.444")
  • Pitch
  • 3/8", or  0.444"
  • Guide Bar Nominal Length
  • 12" , 14", 16" or 19"
  • Max. Cutting Depth
  • 406 mm (w / 16" Bar)
  • Max. Cutting Depth
  • 470 mm (w / 19" Bar)
  • Dimensions (L x W x  H)
  • 635 mm x 250 mm x 316 mm
  • Weight
  • 8.85 kg ( 19.5 lb)
  • Note
  • This tool must be used with the P8K Power Conventer
Download & Warranty
No items found.
Accessories

Standard Accessories

  • Snap Ring Pliers
  • T-Wrench
  • Hex Key (M4)

Optional Accessories

  • Guide Bar (12, 14, 16, or 19")
  • Diamond Chain (general purpose)
  • Sprocket 3/8" or 0.444"